• Measure up to 70* vehicle network parameters with one DBK70
• Synchronously record vehicle network data along with analog and digital measurements made with IOtech’s data acquisition systems
• Supports J1850 VPW, J1850 PWM, ISO-9141, CAN, J1939, Keyword2000
• Up to 4 network types can be attached concurrently to one DBK70
• Attaches to any of IOtech’s data acquisition products
• DBK70 can also be used with any data acquisition device in a stand-alone mode

* See PidPRO software section in PDF

To access complete product information in PDF format Please Click Here. (Updated 9-28-07)

The DBK70 has eight internal slots into which configuration cards can be installed. Four slots are reserved for Network Interface cards, and four slots are for Parameter Capture cards. If only one network is to be used (such as J1850 Variable Pulse Width), then only one Network Interface card is required. If multiple networks are to be attached to one DBK70, then up to four Network Interface cards can be installed.

Each Parameter Capture card enables the simultaneous capture of up to four parameters, such as four different temperatures within the vehicle. To capture more than four parameters simultaneously, additional Parameter Capture cards can be installed. Up to four cards, or a total of 16 network parameters, can be simultaneously captured by one DBK70. If more than 16 parameters need to be captured, virtual channels can be employed.